Sale!

MPPT charge controller 40 amps

£136.67

Increased charge current using MPPT technology

German branded charge controller

For solar panels of up to 520 watts (1040 Watts on 24 Volt systems)

Up to 10%-30% extra charging current compared to PWM controllers

Suitable for lead-acid, gel, AGM and lithium batteries

LCD display for battery voltage and current, solar current etc.

In stock

Description

MPPT charge controller 40 Amps. For motorhome and boat solar panels.

MPPT charge controller 40 amps: Highly efficient charge controller for motorhomes, sailing yachts and narrowboats. For solar panels up to 520 watts on 12 Volt systems (1040 watts on 24 Volt systems)

  • For 12 Volt and 24 Volt systems. Auto-detects system voltage
  • Optimal charging of lead/acid, AGM, Gel or lithium batteries
  • 10%-30% extra use of the solar panel through the MPPT (Mean Power Point Tracking) system
  • Proven high reliability
  • Intelligent 4-stage charging:
    • ‘MPPT’ increases solar panel current to take full advantage of the available sunlight
    • ‘Boost/Absorption’ mode to maximise charge levels, and prolong battery life
    • ‘Equalisation’ mode to balance the cell voltages
    • ‘Float’ mode to maintain the batteries once they are fully charged
  • Specially designed for motorhomes and boats
  • Fully automatic.  Very simple setup
  • LCD display shows: Battery voltage, current and capacity; Solar panel current etc..
  • Temperature probe for the battery.
  • Very easy to install and use.
  • Robust, compact design built for very long life and zero maintenance
  • Can accept solar panels of up to 520 watts (1040 watts on 24 Volt systems)
  • Maximum charging current 40 Amps
  • Dimensions: 196.5 x 136.6 x 97.1 mm

SunWorks solar panels that suit the 40 amp MPPT charge controller:

We can supply rigid aluminium-framed panels, semi-flexible panels and marine grade solar panels. For example:

Installation information for the 40 amp MPPT charge controller:

Each controller comes with complete illustrated instructions. Here are the basics:

  • The controller is mounted inside the boat or motorhome close to either the engine or leisure/domestic battery.
  • Two wires pass through the roof or deck to connect the controller to the solar panel.
  • Two wires connect the controller to the battery.

Typical connections for a motorhome:

 

Typical connections for a boat:

Below we list some useful accessories that will ease the installation of your solar panel system.

Wiring accessories:

To help install this solar charge controller on your motorhome or boat, we recommend the following items:

Other useful accessories:

To make a secure and watertight connection through the roof of your motorhome or the deck of your boat:

MPPT charge controller 40 amps: If you need any further help or advice concerning this product, please do not hesitate to contact us: [email protected]

Additional information

Shipping Weight 3 kg
Shipping Dimensions 25 × 23 × 10 cm
Maximum solar panel power

520/1040 Watts 12/24 Volts

Battery operating voltage (nominal)

12 Volts or 24 Volts (auto detection)

Dimensions

196.5mm x 136.6mm x 97.1mm

Controller weight

1.3 Kgs

Charge modes

MPPT, Boost, Float, Equalise

Recommended wire type

6 mm sq. solar cable

Connection type

Screw terminals

Solar panel maximum Voc

90 Volts (at 25 degC)

Operating temperature

-20 degC to 55 degC

Reviews

There are no reviews yet.

Be the first to review “MPPT charge controller 40 amps”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Menu
Links