Sale!

MPPT charge controller 10 amps

£49.17

Increased charge current using MPPT technology

German branded charge controller

For solar panels of up to 130 watts

10%-30% extra charging current compared to PWM controllers

Suitable for lead-acid, gel and AGM batteries

LCD display for battery voltage and current, solar current etc..

Two USB ports for laptops, phones etc..

Description

MPPT charge controller 10 Amps. For motorhome and boat solar panels.

MPPT charge controller 10 amps: Highly efficient charge controller for motorhomes, sailing yachts and narrowboats. For solar panels up to 130 watts.

  • Optimal charging of lead/acid, AGM or Gel batteries
  • 10%-30% extra use of the solar panel through the MPPT (Mean Power Point Tracking) system
  • Proven high reliability
  • Intelligent 4-stage charging:
    • ‘MPPT’ increases solar panel current to take full advantage of the available sunlight
    • ‘Boost/Absorption’ mode to maximise charge levels, and prolong battery life
    • ‘Equalisation’ mode to balance the cell voltages
    • ‘Float’ mode to maintain the batteries once they are fully charged
  • Specially designed for motorhomes and boats
  • Fully automatic. ┬áVery simple setup
  • LCD display shows: Battery voltage, current and capacity; Solar panel current etc.
  • Two USB ports for charging laptops and phones. 2 amps max
  • Temperature probe for the battery
  • Very easy to install and use
  • Robust, compact design built for very long life and zero maintenance
  • Can accept solar panels of up to 130 watts
  • Maximum charging current 10 Amps
  • Dimensions: 189 x 96 x 53 mm

SunWorks solar panels that suit the 10 amp MPPT charge controller:

We can supply rigid aluminium-framed panels, semi-flexible panels and marine grade solar panels. For example:

Installation information for the 10 amp MPPT charge controller:

Each controller comes with complete illustrated instructions. Here are the basics:

  • The controller is mounted inside the boat or motorhome close to either the engine or leisure/domestic battery.
  • Two wires pass through the roof or deck to connect the controller to the solar panel.
  • Two wires connect the controller to the battery.

Typical connections for a motorhome:

 

Typical connections for a boat:

Below we list some useful accessories that will ease the installation of your solar panel system.

Wiring accessories:

To help install this solar charge controller on your motorhome or boat, we recommend the following items:

Other useful accessories:

To make a secure and watertight connection through the roof of your motorhome or the deck of your boat:

MPPT charge controller 10 amps: If you need any further help or advice concerning this product, please do not hesitate to contact us: [email protected]

Additional information

Shipping Weight 1 kg
Shipping Dimensions 23 × 12 × 8 cm
Maximum solar panel power

130 Watts

Battery operating voltage (nominal)

12 Volts (nominal)

Dimensions

189mm x 96mm x 53 mm

Controller weight

420 grams

Charge modes

MPPT, Boost, Float, Equalise

Recommended wire type

4 mm sq. solar cable, 6 mm sq. solar cable

Connection type

Screw terminals

Solar panel maximum Voc

40 Volts

Operating temperature

-20 degC to +50 degC

Reviews

There are no reviews yet.

Be the first to review “MPPT charge controller 10 amps”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Menu
Links